Danish Pattern Brick and Soaps

Replica Danish pattern brick are cement reproductions of the low fired clay slump brick brought from Europe or produced locally for use in our historic buildings and public works.  There was much variation in the size of the originals, and after extensive random sampling we determined an average size to be 9" long by 4 1/4" wide by 1 3/4" thick.  The length and width of our brick are somewhat regular;  the thickness varies more as both the original brick and the replica are slump brick products.  The 'soaps' are brick 8 1/2" long by 4 1/4" wide by 3/4" thick, to be used on floors or walks where the full thickness brick are unnecessary or too thick to match the adjacent tile.  Our new vehicular brick  are 8 1/12" X 4 1/4" X 2 1/4" and are suitable for use in driveway installations, either on a slab or dry laid on a bed of 1/4" minus rock topped with a dry layer of this aggregate and 20% cement.

All types of brick are available in many colors including the traditional Danish earth tones.  They are suitable for floors, walkways, arches, flower boxes, etc.;  in new construction, additions and restoration, in combination with our tile or other masonry products.  Please also seal and maintain these Portland cement products in the same manner as our tile.  Please do not acid wash or pressure wash our colored concrete products.

Vehicular Brick

Vehicular brick are made with a stronger, aggregate mix of sand, rock and cement.  They are designed to be used for driveways and other areas where regular Danish pattern brick are not strong enough.

Herring bone pattern, on edge for strength                                                                    Book match pattern

Brick and Soap Gallery